Blog

Piston Pump Principle and Structure

Oct 02, 2025 Leave a message

A piston pump relies on the reciprocating motion of a piston to periodically change the working volume of the pump chamber, thus achieving liquid intake and discharge. It consists of a pump cylinder, piston, inlet and outlet valves, inlet and outlet pipes, connecting rod, and transmission device. Power drives the piston to reciprocate within the pump cylinder. When the piston moves upward, the inlet valve opens, allowing water to enter the pump cylinder, while the valve on the piston closes, causing the water in the upper part of the piston to rise with it. When the piston moves downward, the inlet valve closes, and the valve on the piston opens, simultaneously forcing water from the lower chamber of the pump cylinder into the upper chamber and into the outlet pipe. This process of intake and exhaust repeats, continuously discharging water from the outlet pipe. Piston pumps are classified as single-acting and double-acting; single-, double-, and multi-cylinder; horizontal, vertical, and inclined; and motorized, manual, foot-operated, and animal-powered. The flow rate of a piston pump is Q = 0.71–6000 m³/h, and the discharge pressure P2 ≤ 39.2 MPa, with P2 ≤ 24.5 MPa in most cases.

 

The flow rate of a piston pump is determined by the pump cylinder diameter, piston stroke, and the number of piston reciprocations per minute. The head depends on the characteristics of the pipeline. For the same piston pump, the flow rate remains constant, while the head can vary with the characteristics of the pipeline. That is, the head increases while the flow rate remains constant, except in the high-pressure area where the flow rate decreases slightly.

Send Inquiry