If the liquid contains additives or requires vacuum degassing, an electric stirrer must be installed in the dispensing tank.
If the liquid's operability is affected by temperature changes, a temperature control system must be installed in the dispensing tank or pipeline.
If the liquid contains quartz powder or other abrasive powder additives, a piston-type volumetric metering machine is recommended.
If the liquid contains additives and exhibits significant sedimentation, a gear-type metering machine should not be used.
The mixing method for two liquids depends on their ratio and viscosity difference, determining whether static or dynamic mixing is used.
If the viscosity difference between liquids A and B is too large, or the ratio is greater than 5:1, a dynamic mixer is required.
For use with automated equipment, please install high and low level detectors.
If the liquid is prone to crystallization, in addition to the dispensing tank, the supply pipeline must also be equipped with temperature control.
For high daily dispensing volumes, a dispensing pump can be used instead of a dispensing tank.
If air bubbles are unacceptable during product filling, a vacuum filling system must be used.
